Handheld Fiber Laser Welding Machine-mosdar

Model		YH-10000F	YH-15000F	YH-20000F
Input power supply		1P AC220V(-10%+15%)50 Hz
Input power supply		4.5 kw	5.8 kw	7.8 kw
Center wave length		1080±10 nm	1080±10 nm	1080±10 nm
Electro-optical conversion efficiency		≥40%	≥40%	≥40%
Laser power		1000 W	1500 W	2000 W
Fiber cable length		12 m	12 m	12 m
Cooling method		Water cool	Water cool	Water cool
Scan width		0～6 mm	0～6 mm	0～6 mm
Welding wire diameter		0.8/1.0/1.2 mm	0.8/1.0/1.2/1.6 mm	0.8/1.0/1.2/1.6 mm
Shielding gas		Argon/nitrogen （≥3 bar）	Argon/nitrogen （≥3 bar）	Argon/nitrogen （≥3 bar）
Welding thickness		0.5～3 mm	0.5～5 mm	0.5～6 mm
Penetration		0.5~1.5 mm	0.5~3 mm	0.5~4.5 mm
Welding gap range		≤Welding wire diameter	≤Welding wire diameter	≤Welding wire diameter
Singer wire welding and slef fusion welding	Scan width	Not recommended		5~8 mm
	Welding wire diameter			12/16 mm
	Shielding gas			Argon/nitrogen(3≥ bar)
	Welding thickness			3~5 mm
	Penetration			3~5 mm
	Welding gap range			≤Welding wire dianmeter
Cutting	Recommended cutting thickness	≤1.5 mm	≤3 mm	≤5 mm
Cutting	Max cutting thickness	3 mm	5 mm	6 mm
Cutting	Shielding gas	Argon, nitrogen,(4bar≤gas pressure≤7bar）
Cutting	Cleaning speed	25mm/s	50mm/s	50mm/s
Cleaning	Standoff distance	15 cm (F150 focusing lens) 40 cm (F400 focusing lens) 80 cm (F400 focusing lens)
Cleaning	Max. cleaning width	0-30 mm (F150 focusing lens) 0-60 mm (F400 focusing lens) 0-120 mm (F400 focusing lens)
Cleaning	Shieldiing gas	Use oil-free and moisture-free gas;gas pressure≥3 bar;other inert gases
Water tank capacity		8L
Operating temperature		－10℃～40℃; antifreeze needed when ≤5℃
Operating humidity		≤70% at 40℃; ≤90% at 20℃
Power source weight		85 kg	85 kg	92 kg
Packed weight		103 kg	103 kg	110 kg
Package weight of wire feeder and accessories		17.5 kg	17.5 kg	17.5 kg
Power source dimensions		773 x 410 x 737mm	773 x 410 x 737mm	773 x 410 x 737mm
Package dimensions		865 x 475 x 1035 mm	865 x 475 x 1035 mm	865 x 475 x 1035 mm
Package dimensions of wire feeder and accessories		890 x 320 x 430 mm	890 x 320 x 430 mm	890 x 320 x 430 mm

High Welding Efficiency
· Up to 10x faster than manual TIG welding
· Very limited spatter thus little post-weld cleaning needed
· Little need for rework thanks to minimal porosity, undercut, ordistortion
High Energy Efficiency
· CW(continuous wave) laser with 40+% electro-optical conversion efficiency, 10x that of a solid YAG laser
Cost Efficient
· Low welding skill requirement, save on labor cost for experienced arc welder
· Almost 0 maintenance needed for key component, pump source has over 100k hours life span
High Usability
· New industrial design featuring better ergonomics, flexibility and reliability
· Color touch screen control panel with intuitive user interface
· Comprehensive job parameter settings
· Small foot print, great mobility and flexibility
3-Year Warranty
· Comprehensive quality assurance

Welding Technology		Arc Welding	Solid YAG Laser	CW Handheld
Welding	Heat input	High	Low	Low
	Distortion	High	Low	Low
	Weld seam formation	Fillet	Fillet	Variable
	Post weld processing	Yes	Yes	No
	Welding speed	Low	Medium	High
	Ease of use	Low	High	High
Sustainability	Hazard to people	High	Low	Low
Sustainability	Pollution to environment	High	High	Low
Cost	Consumables	Electrode/welding	Crystal, Xenon gas	Shielding gas
	Energy efficiency	High	Low	High
	Skill requirement	High	Moderate	Low
	Footprint	Small	Large	Small

Catagory	No.	Name	Description	Qty.	Unit	Placement locatioin
Main power source	1	Laser welding machine	Handheld laser welding machine： YH-20000F	1	set	Main packaging
Main power source	2	Earth clamp & wire	Earth clamp + 8m cable + 2_pin female connector.	1	pc	On top of machine
Wire feeder	1	Wire feeder	Wire feeder is equipped with 2 pcs 0.8-1.0 V type rollers	1	set	Wire feeder packaging
	2	Accessory box	Divided into three layers	1	box	Wire feeder packaging
	1	liner	φ1.6 red 5m	1	pc	Wire feeder accessories kit
	2	liner	φ1.0 blue 5m	1	pc
	3	Liner	Soft φ1.6 3m	1	pc
	4	Power cable	Total length of 5 meters, with 7 core aviation plugs (hole type) at both ends	1	pc
	1	Top cushion	Processing drawing number：LS-20-23	1	pc	Top layer of accessory box
	2	Confirmation form	JASIC Handheld Laser Welding Installation and Debugging Training Confirmation Form-A0	3	pcs	Top layer of accessory box
	1	Middle cushion	For users to place redundant wire feeding tubes ，Processing drawing number：LS-20-22	1	pc	midddle layer of accessory box
	2	Protective lens	1 box with 5 pcs of D18T2 lens	10	pc
	3	Gas tube	φ6 transparent 5m	1	pc
	4	Gas tube	φ10 blue 0.2m	1	pc
	5	Gas connector	φ10 to φ6	1	pc
	6	Safety goggles	Goggles with goggles bag.	1	pc
	7	QBH shielding sleeve	Black sleeve	1	pc
	8	Cotton swab		1	bag
	9	Clean cloth		1	bag
	10	Operation guide	Brief guide to laser operation.	1	pc
	1	Bottom cushion	Processing drawing number：LS-20-21	1	pc	Bottom layer of accessory box
	2	Ukey		1	pc
	3	Roll	1.2/1.6U	2	pc
	4	Roll	1.2/1.6V	2	pc
	5	Serial port line	USB to 232 serial port, in the pink box.	1	box
	6	Tool packet	Including liners, 12/14 wrench, 14/17 wrench, tips φ0.8/φ1.0/1.2/φ1.6，large Allen wrench，small Allen wrench.	1	box
	7	Copper tips	1 box including AS-12 *2, BS-16, CS-12, ES-12, FS-16, tip C，cutting tip M8 1.5 and graded tube 600-4.	1	box

Address：
Phone：
Email：
Message：

YH-15000F

Handheld Fiber Laser Welding&Cleaning System

Technical Parameters Features Specifications Standard Accessories Optional Accessories